[Noisebridge-discuss] On a brighter note...

Hannah Grimm dharlette at gmail.com
Fri Mar 28 16:00:06 UTC 2014


I'm learning how to use Arduino to program paper circuit art!

Next step: figuring out how to make it easy enough for a twelve year old >.<


On Thu, Mar 27, 2014 at 11:09 PM, Dennis Gentry <dennis.gentry at gmail.com>wrote:

> I diagnosed a bunch of GPU panics on a macbook, made a stepper motor turn
> more smoothly, and soldered up a driver for an RGB LED.
>
>
>
> On Thu, Mar 27, 2014 at 10:16 PM, Henner Zeller <h.zeller at acm.org> wrote:
>
>> On 27 March 2014 21:24, Darius Garza <313kid at gmail.com> wrote:
>> > Raise your hand if you hacked something today !
>>
>> ::raises hand::
>> Ha, thanks, I had the same thought.
>>
>> I was hacking on my commute on a KiCAD
>> output-to-solder-paste-dispensing GCode program today.
>> https://github.com/hzeller/rpt2paste
>>
>> -h
>>
>> >
>> > +1, d.
>> >
>> >
>> > _______________________________________________
>> > Noisebridge-discuss mailing list
>> > Noisebridge-discuss at lists.noisebridge.net
>> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>> >
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20140328/33385a1f/attachment-0003.html>


More information about the Noisebridge-discuss mailing list