[Noisebridge-discuss] looking for a ZIF socket programmer for atmega328p atmel chips
Phillip Pearson
pp at myelin.co.nz
Wed Jan 14 02:46:00 UTC 2015
Jake - what package are you looking at? The atmega328p-pu DIP, the
atmega328p-au TQFP, or one of the more complicated ones?
Is this for production programming? If it's for dev, can you program
it in-circuit instead?
Cheers,
Phil
On Tue, Jan 13, 2015 at 5:58 PM, <pdbogen at cernu.us> wrote:
> You can program them from a serial port as well, albeit very slowly. It's a
> pretty cool hack:
>
> http://avrprogrammers.com/programmers/all-serial-port
>
> - Patrick
>
> On Tue, Jan 13, 2015 at 05:50:04PM -0800, Andy Isaacson wrote:
>> On Tue, Jan 13, 2015 at 05:46:39PM -0800, Jake wrote:
>> > i looked on ebay but couldn't find anything cheap.
>> >
>> > isn't there anything in the open sores community?
>>
>> You can program them with avrdude and a AVRISPmkII and a breadboard.
>>
>> Even cheaper, it's possible to wire something up with a PC parallel port
>> or some GPIOs on a rPi, but I haven't seen the wiring diagram for the
>> latter. (Hey, that would be a cool project for CHM!)
>>
>> -andy
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
> --
> .
> Patrick Bogen .
> ...
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
More information about the Noisebridge-discuss
mailing list