[Noisebridge-discuss] Moar Laser Cutter Infos

Eric Michaud michaud.eric.c at gmail.com
Wed Nov 11 23:51:24 UTC 2015


Zach,

What do you mean by mainboard? Do you mean the USB to LPT converter board?
What's broken other than the missing converter board?

Corey,
Yes you are mathing wrong... ;)


On Wed, Nov 11, 2015 at 3:14 PM, Zach <organic_unity at yahoo.com> wrote:

> I repeat, before we get into this conversation, let me try and work on
> repairing the main board.  That is the bulk of the cost, probably $500 at
> least.  If I can repair that it makes this whole conversation unnecessary.
> If I can't, then we should revisit the "is it worth it" question.
>
> -Zach
> --------------------------------------------
> On Wed, 11/11/15, Corey Quinn <corey at sequestered.net> wrote:
>
>  Subject: Re: [Noisebridge-discuss] Moar Laser Cutter Infos
>  To: "Eric Michaud" <michaud.eric.c at gmail.com>
>  Cc: "noisebridge-discuss" <noisebridge-discuss at lists.noisebridge.net>
>  Date: Wednesday, November 11, 2015, 3:12 PM
>
>  Maybe
>  I'm mathing wrong; I see similar ones for $3500 or so.
>  Not saying this is the best way to go, but I do wonder at
>  what point does trashing the one we've got and replacing
>  it start to make sense?
>  On Wed, Nov 11, 2015 at
>  3:00 PM, Eric Michaud <michaud.eric.c at gmail.com>
>  wrote:
>  What laser cutter with similar capabilities do you
>  see for about $500?
>  On Wed, Nov 11, 2015 at
>  2:51 PM, Corey Quinn <corey at sequestered.net>
>  wrote:
>  Oof. Given that that's over 20% of a *new*
>  laser cutter, at what point do we say "screw it"
>  and start passing the hat to just outright replace the
>  thing?
>  -- Corey
>  On Wed, Nov 11, 2015
>  at 2:36 PM, Eric Michaud <michaud.eric.c at gmail.com>
>  wrote:
>  Hi All,
>  I just
>  spoke with Full Spec and they said as it's EoL it's
>  $750 for a new board and converter.
>  The support tech did admit it's
>  just a USB to parallel converter: I'm going to venture
>  this might solve the hardware problem:
> https://www.cdw.com/shop/products/C2G-USB-to-DB25-IEEE-1284-Parallel-Adapter-Cable-parallel-adapter/1282038.aspx
>  On Fri, Nov 6, 2015
>  at 2:09 AM, Zach <organic_unity at yahoo.com>
>  wrote:
>  Thanks for reply
>  Eric!
>
>    What's your skill set right now?  that would be a
>  good place to start. Right now it needs:
>
>
>
>  1) someone to bug the manufacturer and see costs and
>  possibility of replacement parts (via links i posted
>  below)
>
>  2) hacking a new controller board which is likely parallel
>  to USB adapter (Henner seems to know about this)
>
>  3) order new transistors for the power pcb (once i take it
>  apart to diagnose- might need to bring it home where my good
>  equipment is for that)
>
>  4) taking out the controller board that is there and writing
>  down part numbers to reverse engineer as much as we can.
>
>
>
>  and 5) googling for more info / replacement parts!  people
>  are still selling these around if you dig.  maybe we can
>  find another unit cheap.
>
>
>
>  -Zach
>
>
>
>
>
>
>
>  --------------------------------------------
>
>  On Thu, 11/5/15, Eric Michaud <michaud.eric.c at gmail.com>
>  wrote:
>
>
>
>   Subject: Re: [Noisebridge-discuss] Moar Laser Cutter
>  Infos
>
>   To: "Zach R" <organicunity at hotmail.com>
>
>   Cc: "NB Discuss" <noisebridge-discuss at lists.noisebridge.net>
>
>   Date: Thursday, November 5, 2015, 5:14 PM
>
>
>
>   Hi Zach
>
>   and the Laser Cutter folks,
>
>   My name is Eric, Mitch told me after
>
>   I stopped by for the first time in years that some
>  things
>
>   needed love after I asked about the status of a few
>  pieces
>
>   of key equipment. Focusing on the laser cutter I was
>  curious
>
>   if there was anything I could do to help, and figure
>  out
>
>   what was blocking at this time.
>
>   Nice to meet
>
>   you,-Eric.
>
>   On Tue, Nov 3, 2015 at
>
>   11:39 PM, Zach R <organicunity at hotmail.com>
>
>   wrote:
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>   So I brought this up at the meeting tonight and then I
>
>   did more research.  Found some more useful info.
>
>
>
>
>
>
>
>
>
>
>
>   model #: MLR-40
>
>
>
>
>
>   40w Full Spectrum Laser
>
>
>
>
>
>   Manufacturer website:
>
>   http://en.jnmydy.com/
>
>
>
>
>
>
>
>   And here are the pictures I took:
>
>
> http://s18.photobucket.com/user/Segasonicfan/library/NB%20Hardware%20Class?sort=3&page=1
>
>   Here is the controller board we are missing:
>
>
> https://moderndevice.com/wp-content/uploads/2012/06/fse-controller-768x1024.jpg
>
>
>
>
>
>   http://www.laserresale.com/?fa=app.view&it=5966
>
>
>
>   https://moderndevice.com/news/full-spectrum-engineering-40w-hobby-laser/
>
>
>
>   http://wiki.lvl1.org/Full_Spectrum_Laser
>
>
>
>   http://www.therpf.com/showthread.php?t=140518
>
>
>
>
>
>   https://fslaser.com/Manuals/FSL_40w_Hobby_Laser_Manual.pdf
>
>     (manual)
>
>
>
>
>
>
>
>   There is a second hand one for $1500 we could raise
>  money
>
>   for.  That way we have this one for parts.  That's
>  one
>
>   option.
>
>
>
>
>
>   Im going to try emailing the manufacture to see what
>
>   replacement costs would be.
>
>
>
>
>
>
>
>   -Zach
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>   _______________________________________________
>
>
>
>   Noisebridge-discuss mailing list
>
>
>
>   Noisebridge-discuss at lists.noisebridge.net
>
>
>
>   https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
>
>
>
>
>
>
>
>   -----Inline Attachment
>  Follows-----
>
>
>
>   _______________________________________________
>
>   Noisebridge-discuss mailing list
>
>   Noisebridge-discuss at lists.noisebridge.net
>
>   https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
>
>
>  _______________________________________________
>
>  Noisebridge-discuss mailing list
>
>  Noisebridge-discuss at lists.noisebridge.net
>
>  https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
>
>
>
>  _______________________________________________
>
>  Noisebridge-discuss mailing list
>
>  Noisebridge-discuss at lists.noisebridge.net
>
>  https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
>
>
>
>
>  -----Inline Attachment Follows-----
>
>  _______________________________________________
>  Noisebridge-discuss mailing list
>  Noisebridge-discuss at lists.noisebridge.net
>  https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20151111/4453a8dc/attachment-0003.html>


More information about the Noisebridge-discuss mailing list