[Noisebridge-discuss] arduino dmx receiver

robb sf99er at gmail.com
Thu Apr 7 09:07:05 UTC 2016

as it turns out, mathertels DmxSerial
<https://github.com/mathertel/DMXSerial>Recv example works out of the box
w/Arduino 1.6.8 but my connection from DE to RE was loose. jerkey looked at
it and squeezed it and it started working!
DE & RE are connected together & to pin 2.
RO is connected to Rx.


On Fri, Apr 1, 2016 at 5:19 PM, robb <sf99er at gmail.com> wrote:

> //       Turns out that as I'm using an ungrounded power brick, I probably
> don't need all of this, but I had all the parts so I made them anyway :)
> easier to switch power supply, than to add isolation
> //       Take a look in HardwareSerial0.cpp; it looks like you'll want to
> search for USART_RX_vect and USART0_RX_vect.
> thx, found it. after editing file, still couldn't receive tho.
> //        This probably changed when the Arduino folks started making
> boards with more than one serial port.
> i think your right
> //        Nothing so far -- I'm making lighting stuff for my wedding in a
> couple of months, and I want a friend who does a lot of DMX lighting to be
> able to control my hardware with his controllers!
> congrats & i look forward to seeing your implementations!
> i'm hoping to eventually add 7segment leds displays for setting the dmx
> channel w/up & down buttons, if i get it working.
> different modes would be nice, too
> cheers,
> ~r
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20160407/dfa62fa2/attachment-0003.html>

More information about the Noisebridge-discuss mailing list