[Noisebridge-discuss] Does anyone have a tig welder to donate to noisebridge?

[Corey]

registering my interest in this // offering time/labor to get a TIG welder
into NB (transport, logistics, etc)

I’ll reach out to some people at the Crucible to see if they have any leads
and I’ll be at Dept of Spontaneous Combustion open house tomorrow night and
ask there as well

-- 
Corey | @stackptr

On February 21, 2018 at 1:56:37 PM, Trent Robbins (robbintt at gmail.com)
wrote:

Hi Tony, yes it would go in the hot area with the mig welder. There is a
small project size welding table there, 3'x4'.

Trent

On Wed, Feb 21, 2018 at 13:50 Tony Godshall <togo at of.net> wrote:

> noisebridge newbie (nb^2) question:
>
> would it go in sparkleforge?
>
> https://www.noisebridge.net/wiki/SparkleForge
>
>
> On Tue, Feb 13, 2018 at 10:39 PM, Trent Robbins <robbintt at gmail.com>
> wrote:
> > Hi All,
> >
> > I heard through the grapevine that a bunch of people have old tig welders
> > they don't use much.
> >
> > Is anyone willing to give theirs to Noisebridge?  You can get a tax
> receipt.
> >
> > I don't know if we need more than one variety to have as much capability
> as
> > people would need to both repair and construct with tig.
> >
> > Thanks!
> >
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://lists.noisebridge.net/mailman/listinfo/noisebridge-discuss
> >
>
>
>
> --
> --
> Best Regards.
> This is unedited.
> This message came out of me
> via a suboptimal keyboard.
>
--
(Sent from cellphone)
_______________________________________________
Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net
https://lists.noisebridge.net/mailman/listinfo/noisebridge-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20180226/5b705ee0/attachment.html>