[Rack] power loss
miloh
froggytoad at gmail.com
Fri Sep 10 04:45:02 UTC 2010
Lol, that's great!
On Sep 9, 2010 8:48 PM, "Jonathan Lassoff" <jof at thejof.com> wrote:
On Thu, Sep 9, 2010 at 8:42 PM, Jonathan Lassoff <jof at thejof.com> wrote:
> On Thu, Sep 9, 2010 at 8:...
I was able to connect via telnet to the IP PDU which has the most
unintuitive interface possible:
##################################
# telnet 172.30.0.7
Trying 172.30.0.7...
Connected to 172.30.0.7.
Escape character is '^]'.
9258Telnet command shell
Type 'help' and return for help
9258Telnet-> help
Available commands:
setpower - Set port state
getpower - Read port status
exit - exit shell
9258Telnet-> getpower
Power Status:
Power1=Off
Power2=Off
Power3=Off
Power4=Off
Power5=Off
Power6=Off
Power7=Off
Power8=Off
##################################
Hmm, ok. Let's turn on outlet 1 and 2 (where pony and stallion connect):
##################################
9258Telnet-> setpower
Parameter Error!
9258Telnet-> help setpower
Available commands:
setpower - Set port state
getpower - Read port status
exit - exit shell
9258Telnet-> setpower Power1=on
Parameter Error!
9258Telnet-> setpower Power1 on
Parameter Error!
9258Telnet-> setpower Power1
Parameter Error!
##################################
WTF!? How does this work?
##################################
9258Telnet-> setpower=11000000
Set Power Done!
9258Telnet-> getpower
Power Status:
Power1=On
Power2=On
Power3=Off
Power4=Off
Power5=Off
Power6=Off
Power7=Off
Power8=Off
##################################
So, if you ever need to do this again... here's how. I'll add this to the
wiki.
Cheers,
jof
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/rack/attachments/20100909/06834cdc/attachment.html>
More information about the Rack
mailing list