[Rack] Network down - no wireless, ethernet only

[Dr. Jesus]

On Thu, Mar 31, 2011 at 4:43 PM, Jonathan Lassoff <jof at thejof.com> wrote:
> On Thu, Mar 31, 2011 at 4:40 PM, Jonathan Lassoff <jof at thejof.com> wrote:
>> On Thu, Mar 31, 2011 at 4:39 PM, Jonathan Lassoff <jof at thejof.com> wrote:
>>> On Thu, Mar 31, 2011 at 4:38 PM, Jonathan Lassoff <jof at thejof.com> wrote:
>>>> Which switch are you wiring into? I would check that switch2.noise is
>>>> up and running -- that's where all the APs connect to.
>>>>
>>>> Seeing if I can see what's up from remote...
>>>
>>> I can't reach anything over the Sonic.net circuit, so I can't login
>>> from remote (AFAIK, we're still NATed via Monkeybrains).
>>>
>>> Maybe check that the DSL modem is running ok?
>>
>> I take that back -- maybe pings are blocked? I don't remember this
>> being the case.
>
> I think switch3.noise is down (a small 8-port Cisco one). Though I can
> still reach pony -- maybe Pony's interfaces moved?
>
> At any rate, here's the diagram:
> https://www.noisebridge.net/wiki/Network#Network_Diagram
>
> See if that switch is still up. If it's really dead, we'll have to
> configure and cable up a new one.

All the switches seem to be up from pony's perspective and I'm seeing
NAT states for nodes connecting to the local network via ap2.  Is
there still a problem?