[Rack] [Noisebridge-discuss] network down this afternoon, an interesting guide for people who want to help when the network goes down
Ben Kochie
ben at nerp.net
Tue Jun 5 20:26:25 UTC 2012
I've updated the wiki
-ben
On Tue, 5 Jun 2012, Ben Kochie wrote:
> r00ter has been replaced by bikeshed.
>
> -ben
>
> On Tue, 5 Jun 2012, Danny O'Brien wrote:
>
>> On Tue, Jun 5, 2012 at 11:30 AM, Jonathan Lassoff <jof at thejof.com> wrote:
>>> On Tue, Jun 5, 2012 at 10:19 AM, Ben Kochie <superq at gmail.com> wrote:
>>>> To me it sounds like there was a rouge dhcp server or some kind of
>>>> dhcp problem going on and nothing to do with the links.
>>>
>>> EIther that or some legitimate breakage or resource constraint on the
>>> Soekris.
>>> It's really hard to tell what "dhcp is broken" means without doing a
>>> packet capture or heavy logging from a DHCP client. And I'd much
>>> rather not setup something to just log packets to look back on when
>>> things are "broken", that wouldn't be very nice.
>>>
>>> It's certainly possible that another host attached to the
>>> Ethernet/802.11 network(s) was responding to DHCP requests and
>>> poisoning people's configuration.
>>
>> This *is* possible, but I think the fact that no-one was getting any
>> good DHCP values argues slightly against it.
>>
>> Just to be clear: do we still have r00ter and bikeshed? Or have these
>> been smershed into just bikeshed?
>>
>> If so, could someone update
>> https://www.noisebridge.net/wiki/Network#Routers
>>
>> with the new details, cheers.
>>
>> d.
>>
>>
>>>
>>> This is indeed blockable, but only up to the point where managed
>>> switches end. The Juniper, and some of the Cisco switches can perform
>>> this filtering, but the 48-port Linksys or the scattering of dumb
>>> switches and hubs out and about will not be able to single-out
>>> offenders.
>>>
>>> Not sure about the 802.11 case. I suppose it's possible with client
>>> isolation on the AP. The Ubiquiti AP probably can't, but upstream from
>>> it we can pick off those ports.
>>>
>>>> One good way we can fix this is to put dhcp server controls at the
>>>> switch and wifi network level. I don't know if the equipment we have
>>>> is capable of doing this. :/
>>>
>>> I'll see if I can pick out what will and wont do it.
>>>
>>> --j
>>>
>> _______________________________________________
>> Rack mailing list
>> Rack at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/rack
>
More information about the Rack
mailing list