[Rack] tubes report

Jonathan Lassoff jof at thejof.com
Tue Oct 15 04:05:25 UTC 2013

Try all the bauds? Does anything come out via a null modem cable?

Check the insides for burned out components?


"3.12 D2, Error LED
This red LED is connected to the PC87366 Multi-IO controller GPIO6,
pin D9. It is connected so that it
will be on at power on, and can then be turned off and on by software
control. When programming GPIO6
with a 0, it will be off. The BIOS will normally turn it off just
before booting an operating system."

On Mon, Oct 14, 2013 at 8:49 PM, Casey Callendrello <c1 at caseyc.net> wrote:
> The soekris box doesn't boot - it just sits there with the Error light on.
> I'm working on debugging this now, but if anyone has any pointers,
> that'd be great.
> -c
> _______________________________________________
> Rack mailing list
> Rack at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/rack

More information about the Rack mailing list