[Rack] tubes report

[Ben Kochie]

I updated bikeshed to the latest vyatta.

I think we still have the issue where the soekris/grub don't boot unless 
you actively attach to the serial line.  I changed the serial speed to 
115200 to make booting less painful.

FYI since this wasn't mentioned before:

bikeshed can be found on /dev/ttyUSB1 speed 115200

-ben

On Mon, 14 Oct 2013, Casey Callendrello wrote:

> Everything is back to normal. We restored the current configuration.
> -c
>
> On 10/14/13 10:17 PM, Jonathan Lassoff wrote:
>> If you serial into the management port of the switch and take a look
>> around, you can see there are VLANs and ports in each. We set some
>> descriptions of what was intended to be plugged into each port.
>>
>> On Mon, Oct 14, 2013 at 9:54 PM, Casey Callendrello <c1 at caseyc.net> wrote:
>>> Smacked the vyatta service back in to compliance. Things seem sane. Now
>>> we need to recable it. Starting that now.
>>> -c
>>>
>>> On 10/14/13 9:06 PM, Casey Callendrello wrote:
>>>> Booted. The vyatta service fails during init with an error. Debugging now.
>>>> -c
>>>>
>>>>
>>>> On 10/14/13 8:49 PM, Casey Callendrello wrote:
>>>>> The soekris box doesn't boot - it just sits there with the Error light on.
>>>>>
>>>>> I'm working on debugging this now, but if anyone has any pointers,
>>>>> that'd be great.
>>>>> -c
>>>>>
>>>>> _______________________________________________
>>>>> Rack mailing list
>>>>> Rack at lists.noisebridge.net
>>>>> https://www.noisebridge.net/mailman/listinfo/rack
>>>> _______________________________________________
>>>> Rack mailing list
>>>> Rack at lists.noisebridge.net
>>>> https://www.noisebridge.net/mailman/listinfo/rack
>>> _______________________________________________
>>> Rack mailing list
>>> Rack at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/rack
>
> _______________________________________________
> Rack mailing list
> Rack at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/rack
>