[Build] labeling breakers

[Shannon Lee]

Awesome, guys!

Jim and Neil also pointed out last night that the front box needs to be
mapped as well, even though it's disassembled. You'd basically do this
mapping by visually tracking the conduit from the box to where it goes.

Have fun,

--S



>  Just wanted to add two things:
>
>  1. flipping the breakers - if you do it back and forth it is easiest to
> notice from the tester holder's point of view (it will blink).
>
>  2. the non labeled breakers - Markus put a dot on each breaker that we
> managed to find a corresponding socket. The rest probably go into
> another panel (afaict) which was off. Presumably the torn out panel? I
> don't know. All the sockets in the wall that are not labeled are dead -
> and none of the unlabeled breakers affect them.
>
>
> Also, the easy to use tester is in the blue tool box, on the far left
> corner from the main entrance.
>
>
> Alon
>
>
> _______________________________________________
> Build mailing list
> Build at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/build
>



-- 
Shannon Lee
(503) 539-3700

"Any sufficiently analyzed magic is indistinguishable from science."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/build/attachments/20090822/da662f32/attachment-0003.html>