[Build] labeling breakers
Rachel McConnell
rachel at xtreme.com
Fri Aug 21 21:27:51 UTC 2009
Thanks so much for doing this work! It's very much appreciated.
Rachel
Alon Levy wrote:
> Hi,
>
>
> Just wanted to add two things:
>
> 1. flipping the breakers - if you do it back and forth it is easiest to
> notice from the tester holder's point of view (it will blink).
>
> 2. the non labeled breakers - Markus put a dot on each breaker that we
> managed to find a corresponding socket. The rest probably go into
> another panel (afaict) which was off. Presumably the torn out panel? I
> don't know. All the sockets in the wall that are not labeled are dead -
> and none of the unlabeled breakers affect them.
>
>
> Also, the easy to use tester is in the blue tool box, on the far left
> corner from the main entrance.
>
>
> Alon
>
>
> _______________________________________________
> Build mailing list
> Build at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/build
More information about the Build
mailing list