[Noisebridge-congress] rad1o

[Christoph Maier]

On 08/06/2015 05:58 PM, Ronald Miloh Alexander wrote:
I verpeil that in the sense that I'm too late for 2nd day air digikey,
except for some SMA etc. to borrow from UCSD.
Anyhone aware of (and have experience with) 2nd day air delivery to Germany?


> I started reading up on the cccamp15 rad1o badge before leaving, for
> those that want to hack on it, there's a "things to bring" section
> of the rad1o wiki at
>
>   https://rad1o.badge.events.ccc.de/
>
>      Micro USB cable
>      OTG cable, if you would like to use the badge with your mobile phone (Wikipedia)
>      Portable Display Screen Equipment, ideally with selected software pre-installed
>      external power bank
>      external antenna (Antennas)
>      LEDs (WS2812B LEDs) (8 LEDs per badge, see RGB LEDs for details)
>      something to cover the light sensitive chip on the display (e.g. a dark permanent marker, nail polish, or a dark sticker)
>
>
> Lots of detail on these parts here:
>   https://rad1o.badge.events.ccc.de/parts
>
>
> Note: if you are considering 3D printing a case, with the high heats you should
> sous vide anneal the prints so they can withstand the summer heats.
>   https://plus.google.com/+JamesKaoM/posts/JBUw39CkpNV
>
> If you don't have time or funds to get any hardware, get copies of the rad1o repos at the rad1o orga account on github:
>   https://github.com/rad1o
>
>
>
>
> _______________________________________________
> Congress mailing list
> Congress at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/congress
>