[Darkroom] Water heater controller
jasmine at electronpusher.org
Wed Feb 16 07:05:14 UTC 2011
It also says to make sure that the remote control jumper is set to "off" rather than "rem" if you don't have the remote control panel (which is, how quaint, a 4-20 mA current loop controller option.)
On 15 Feb 2011, at 23:02, Jasmine Strong wrote:
> Ok, so there's a dual solenoid valve in this thing. If you remove the connections from the hot solenoid (it is the one on the right) then it should read between 18 and 22 ohms with a multimeter.
> I suspect the plunger might be stuck, or the diaphragm might be dirty. It is designed to be disassembled and these parts are service parts (they're said t be in the Annual Service Pack... yeah right) but I suspect cleaning them carefully and pushing a thin probe through the pilot holes might fix the problem.
> On 15 Feb 2011, at 22:50, Rubin Abdi wrote:
>> Jasmine Strong wrote, On 20110215 224609:
>>> Is there enough hot water pressure? Many of those types of solenoid valves are pilot-operated and won't switch without sufficient head.
>> Yup, I took the intake off and pissed hot water into the sink at plenty
>> of pressure.
>> Rubin Abdi
>> rubin at starset.net
> Darkroom mailing list
> Darkroom at lists.noisebridge.net
More information about the Darkroom