[Noisebridge-discuss] Network status
Jonathan Lassoff
jof at thejof.com
Fri Oct 3 05:08:13 UTC 2008
On Thu, Oct 02, 2008 at 07:57:28PM -0700, Jacob Appelbaum wrote:
> Thanks to Jof and Andy, we've got an openbsd box up as the core router
> and a linksys box up as our wifi router. We'll probably want to reflash
> the linksys at some point to run some free firmware (Qos, etc).
> Currently it's working fine. The soekris has a cloned MAC address
> because Andy's laptop was the first to use the cable modem.
>
> Here's the configuration information for the wifi:
> eth1 Link encap:Ethernet HWaddr 00:DE:AD:C0:FF:EE
> inet addr:172.30.0.200 Bcast:172.30.1.255 Mask:255.255.254.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1557 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1142 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:6246582 (5.9 MiB) TX bytes:1264179 (1.2 MiB)
> Interrupt:50 Base address:0x8000 Memory:a0202000-a0202fff
>
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 172.30.0.0 0.0.0.0 255.255.254.0 U 0 0 0 eth1
> 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1
> 0.0.0.0 172.30.0.1 0.0.0.0 UG 0 0 0 eth1
>
> eth1 IEEE 802.11g ESSID:"noisebridge"
> Mode:Managed Frequency:2.412 GHz Access Point: 00:18:F8:F9:32:ED
> Bit Rate:54 Mb/s Tx-Power=20 dBm Sensitivity=8/0
> Retry limit:7 RTS thr:off Fragment thr:off
> Power Management:off
> Link Quality=88/100 Signal level=-41 dBm Noise level=-91 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:4
>
> Best,
> Jake
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
More info on the Network wiki page - https://www.noisebridge.net/index.php/Network
Cheers,
jonathan
More information about the Noisebridge-discuss
mailing list