[Noisebridge-discuss] AP info and gear needed

[Mark Cohen]

If anyone has any RP-SMA to N type adapters, I've got some high gain  
antennas. (Panel and Omni)

Or we could have fun and make some 2.4GHz antennas.

I can't make it tonight, my SO made plans that she can't make... So I  
get to... :/

Assuming people will be around during the rest of the week, I can  
bring by the antennas, some N type connectors and possibly some cable.  
(I've got stippers/crimpers to terminate as well as an EyeSpy to do  
some testing.)

-Mark


On Sep 29, 2008, at 7:24 PM, grey wrote:

> Howdy folks,
>
> I'm not really a fan of mailing lists so I'll keep this short:
>
> As discussed, I've got an AP that I can bring by tomorrow to get
> interim net access to the Wiese Str. location, it's got two RP-SMA
> antennae male connectors on it but I have no female
> connectors+antennae to attach to it, and I don't think the onboard
> external antennae will be enough to do the trick, so if anyone has an
> antenna with an RP-SMA female connector to use that would come in
> handy.  Ideally, two so that I can attach one to the AP I'll be
> beaming things from.  (I won't need four because one antenna connector
> is for 802.11b/g and the other is for 802.11a and we will only be
> using the 802.11b/g due to some issues which I won't go into here).
> On a similar note, I could use another AC adapter that outputs 48V @
> 0.38Amps to plug into the AP as well (I've got one, but I will be
> moving the other AP to a spot w/o PoE), I s'pose simply a PoE injector
> would also work but is probably less likely to be knocking around in
> people's spare parts bins.
>
> Anyway, any help on antennae or power as outlined above would be handy
> for tomorrow.
>
> Thanks in advance!
>
> -grey
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss