[Noisebridge-discuss] AP info and gear needed

[Matt Peterson]

I've got some Cisco AP's I can throw to the cause, though they're RP- 
TNC.  I can also throw a Soekris board into the mix for a router and  
such.  Currently traveling abroad, but back in town in a week or so,  
cheers.

--Matt

On Sep 29, 2008, at 7:24 PM, grey wrote:

> Howdy folks,
>
> I'm not really a fan of mailing lists so I'll keep this short:
>
> As discussed, I've got an AP that I can bring by tomorrow to get
> interim net access to the Wiese Str. location, it's got two RP-SMA
> antennae male connectors on it but I have no female
> connectors+antennae to attach to it, and I don't think the onboard
> external antennae will be enough to do the trick, so if anyone has an
> antenna with an RP-SMA female connector to use that would come in
> handy.  Ideally, two so that I can attach one to the AP I'll be
> beaming things from.  (I won't need four because one antenna connector
> is for 802.11b/g and the other is for 802.11a and we will only be
> using the 802.11b/g due to some issues which I won't go into here).
> On a similar note, I could use another AC adapter that outputs 48V @
> 0.38Amps to plug into the AP as well (I've got one, but I will be
> moving the other AP to a spot w/o PoE), I s'pose simply a PoE injector
> would also work but is probably less likely to be knocking around in
> people's spare parts bins.
>
> Anyway, any help on antennae or power as outlined above would be handy
> for tomorrow.
>
> Thanks in advance!
>
> -grey
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20080930/59be036a/attachment-0003.html>