[Noisebridge-discuss] Filling order for MA3 Miniature Absolute Magnetic Shaft (Rotary) Encoders
Michael Shiloh
michaelshiloh1010 at gmail.com
Tue Apr 14 21:12:30 UTC 2009
hey corey! nice to see you here!
isn't dead reckoning flawed? or are you tolerant of these flaws?
Corey McGuire wrote:
> Hey all, new to the list but been to NB a dozen times.
>
> I am filling out an order for a project Christie and I are working on.
> The application we have is, we need position sensing for steering and
> dead reckoning for robots. There are a number of considerations and
> we've had a tough time finding one thing that does it all:
>
> * Absolute encoding
> * High Resolution (positions per revolution)
> * Cycles (many as low as 20,000 revolutions!)
> * Size
> * Pin-out (many encoders require up to 8 digital IO each)
> * Price
>
> But with the advice of the good Dr. Foote, we may have found what we
> need. It's almost too perfect!
>
> http://tr.im/abmag
>
> 1. It's got Absolute encoding
> 2. It has 10bit or 12bit resolution. Up to 4096 positions per
> revolution! (We were going to settle for 16!)
> 3. Cycles are in the millions, depending on the load
> 4. .3" in diameter
> 5. 3 pins
> 6. As low as $36 for single orders
>
> Ok, so these are 5 times as expensive as the encoders we were going to
> use, but the cheap encoders meant we were either going to need serious
> hardware to read all the data, or we were going to need an Arduino per
> encoder. They may still have been cheaper, but not when considering our
> labors.
>
> There are two models I am interested in. They are identical except that
> one uses bushings and one uses ball bearings. The ball bearing model
> has a long life, can operate at higher speed, is less weight and may be
> smaller. The price difference starts at $6.
>
> If anyone else is interested in getting in on an
>
> MA3-P10-125-N
>
> Quantity Price
> 1 $36.00
> 10 $31.54
> 50 $27.78
> 100 $23.89
> Over 100 Call for quote
>
>
> MA3-P10-125-B
>
> Quantity Price
> 1 $41.80
> 10 $37.34
> 50 $33.58
> 100 $29.69
> Over 100 Call for quote
>
>
> We are interested in getting a bulk order in, not just to lower price,
> but because we thought others might be interested, and the more
> interested people we have, the more brains we have to pick should there
> be problems.
>
> What say ya'll?
>
> Ciao!
>
> --
> Success is a tasty spirit distilled from bitter failure
> --Coreyfro
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
More information about the Noisebridge-discuss
mailing list