[Noisebridge-discuss] Help with Eagle CAD

[Rachel McConnell]

HA HA HA HA I went through this couple months ago.  Mitch told me to
just take 2 days and mess with it, and then I'd have enough skill to go
forward.  I do not think I've actually used up ALL the 2 days, but I got
enough skill to go forward.  So: *not* expert, or even good, but I can
help you get going with it.

Until then, some Instructables!  A member wrote a little course a while
back which I found as useful as anything else.

http://www.instructables.com/id/Draw-Electronic-Schematics-with-CadSoft-EAGLE/
http://www.instructables.com/id/Turn-your-EAGLE-schematic-into-a-PCB/
http://www.instructables.com/id/Make-hobbyist-PCBs-with-professional-CAD-tools-by-/
http://www.instructables.com/id/How-to-make-a-custom-library-part-in-Eagle-CAD-too/

Rachel

Adam Skory wrote:
> Hi all! Eric and I are trying to design a printed circuit board to
> start taking our compass vibro-anklet out of the beta stage by getting
> some custom printed circuit boards made. It was recommended that we
> design this board using Eagle CAD. Turns out using Eagle CAD is hard
> and not intuitive.
> 
> So, Noisebridge, can anyone help us? Your help could come in
> recommending something better, or a good resource for learning Eagle,
> or, even excellent-er, you could donate 30 minutes of your life and
> teach us how to use Eagle or another PCB CAD tool proficiently. We
> will gladly buy you beer or the like for your troubles!
> 
> -Skory
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss