[Noisebridge-discuss] Help with Eagle CAD

[Jonathan Foote]

I'm well up on the Eagle learning curve and have successfully designed
and fabbed lots of boards with several different vendors. It's a
little quirky but solid and powerful. I'd be happy to pontificate (you
folks know me ALL too well) : anything from basic design tips to
special topics like adding custom images to silkscreen layers and
getting your Gerber files out.



On Tue, Apr 21, 2009 at 1:41 PM, Adam Skory <askory at gmail.com> wrote:
> Hi all! Eric and I are trying to design a printed circuit board to
> start taking our compass vibro-anklet out of the beta stage by getting
> some custom printed circuit boards made. It was recommended that we
> design this board using Eagle CAD. Turns out using Eagle CAD is hard
> and not intuitive.
>
> So, Noisebridge, can anyone help us? Your help could come in
> recommending something better, or a good resource for learning Eagle,
> or, even excellent-er, you could donate 30 minutes of your life and
> teach us how to use Eagle or another PCB CAD tool proficiently. We
> will gladly buy you beer or the like for your troubles!
>
> -Skory
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>