[Noisebridge-discuss] Help with Eagle CAD

[Noah Balmer]

> Just remember that you shouldn't trust a part from a library that you
> didn't make yourself.   Someone else might not have made the part correctly,
> and it's a very expensive mistake to find out after fabrication.  Making
> your own parts is fun and easy, and you can work straight from the
> datasheet.
>
> Alternatively, use parts out of the library but verify them against the
datasheet (faster).

Also, get a couple cheap bare boards made and build em up before doing a 500
board order with solder mask and silkscreening and a critical mistake;) The
printed "paper pcb" Lamont mentioned is a good test too.


I recall the eaglecad site having some great tutorials.  Haven't looked in a
couple years though.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20090422/2c260952/attachment-0003.html>