[Noisebridge-discuss] Laser printer at 83c broken

[Martin Bogomolni]

Not everything in this world has to come off a prototyping machine
*chuckle*.   If you can get a good cast of the part, a resin copy (of
the correct resin) will be very accurate and more than strong enough.
 Of course, you can also go salvage the part from another broken
printer too.

-Martin

On Sun, Jul 26, 2009 at 8:31 PM, d p chang<weasel at meer.net> wrote:
> "Michael C. Toren" <mct at toren.net> writes:
>
>> David Allen, Skory, and I investigated it briefly, and discovered that
>> a white plastic piece which actuates the toner carousel assembly broke
>> off.  We've taped that piece to the top of the printer and unplugged
>> it for now.  It's possible it could be glued back together, but I'm
>> not sure how strong the bond would be.
>
> a job for the maker-bot? :-) (not sure if this is 'load bearing' though)
>
> \p
> ---
> Dans la vie il faut montrer du caractère et de la gentillesse.
>                - Pablo Casal
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>