[Noisebridge-discuss] Dremel 395 needs switch?

[Chris Murphy]

Ani says it failed during use.

I've done 5 mins of troubleshooting on the now broken Dremel Multipro 395.

Sounds like a design flaw leads to failure of the switch.

http://www.fixya.com/support/t184778-dremel_395_turn

A new switch is $17:
http://www.toolsforless.com/product/1812/Dremel_2615294888_Switch_Assembly

A new dremel is $60 on amazon... though I would not recommend buying the
same model (or the 595 either).

More general repair details:
http://messageboard.dremel.com/Topic4517-28-1.aspx

Exploded view:
http://www.ereplacementparts.com/dremel-395-f013039504-corded-multitool-parts-c-15440_15456_15470.html

This is Noisebridge's only dremel... ?

Chris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20091106/4c016951/attachment-0002.html>