[Noisebridge-discuss] Dremel 395 needs switch?

[Shannon Lee]

Which dremel would you recommend buying?  What're the deciding factors?

--S

On Fri, Nov 6, 2009 at 1:52 AM, Chris Murphy <chrisnoisebridge at gmail.com>wrote:

> Ani says it failed during use.
>
> I've done 5 mins of troubleshooting on the now broken Dremel Multipro 395.
>
> Sounds like a design flaw leads to failure of the switch.
>
> http://www.fixya.com/support/t184778-dremel_395_turn
>
> A new switch is $17:
> http://www.toolsforless.com/product/1812/Dremel_2615294888_Switch_Assembly
>
> A new dremel is $60 on amazon... though I would not recommend buying the
> same model (or the 595 either).
>
> More general repair details:
> http://messageboard.dremel.com/Topic4517-28-1.aspx
>
> Exploded view:
>
> http://www.ereplacementparts.com/dremel-395-f013039504-corded-multitool-parts-c-15440_15456_15470.html
>
> This is Noisebridge's only dremel... ?
>
> Chris
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>


-- 
Shannon Lee
(503) 539-3700

"Any sufficiently analyzed magic is indistinguishable from science."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20091106/3f5a3bf9/attachment-0003.html>