[Noisebridge-discuss] elevator
nils at shkoo.com
nils at shkoo.com
Wed Oct 7 06:28:36 UTC 2009
I tried pushing it closed as best as I could while pushing the call button
repeatedly with no effect. Is there a way to make the process for calling
the elevator less onerous? Can we put some conductive pading in or
something so the relays will close without having to sacrifice a goat
under a full moon?
On Tue, 6 Oct 2009, Zedd Epstein wrote:
> The third floor door wasn't closed all the way. Usually when that is the
> problem, the solution is to reclose the door on whatever floor isn't
> working.
>
> Zedd
>
> On Tue, Oct 6, 2009 at 11:17 PM, <nils at shkoo.com> wrote:
>
>> Hi,
>>
>> I couldn't get the elevator to go to the third floor today.
>>
>> It wouldn't go to the ground floor when called, and then it would only go
>> up to the second floor. Neither the button inside the elevator nor the
>> call button on the 3rd floor would coax it up all the way. Trying to make
>> sure all the outside elevator doors were shut was also ineffective.
>>
>> Is there a trick to it?
>>
>> Is there something we can do to make it easily operable again? Or is that
>> something we need to go to the landlord about?
>>
>> -nils
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>
More information about the Noisebridge-discuss
mailing list