[Noisebridge-discuss] Mesh networking meetup?

[dpc]

sorry for the noise. i was going to respond to the people who showed up,
but i dont have 'just' their addresses.

the 4 pin header really is just serial/uart at 3.3v. from the edge
closest to the case:

        vin 
        rxd
        txd
        gnd

i'm using 115200 n-8-1. from here you get

  Welcome to Meraki.

  Usage of this device is governed by Meraki's End User License
  Agreement, available at http://meraki.com/legal.

  00:18:0A:01:76:04:/# uname -a
  Linux 00:18:0A:01:76:04 2.6.16.16-meraki-mini #4 Thu Jul 30 21:48:39 PDT 2009 mips unknown
  00:18:0A:01:76:04:/# ls
  LAST_BOOT_COUNT  MERAKI_SERIAL    lib              usr
  MERAKI_ARCH      bin              proc             var
  MERAKI_BOARD     click            sbin             www
  MERAKI_BUILD     dev              storage
  MERAKI_IP        etc              sys
  MERAKI_MAC       init             tmp
  00:18:0A:01:76:04:/# mount
  none on /proc type proc (rw)
  /dev/mtdblock2 on /storage type jffs2 (rw)
  none on /tmp type tmpfs (rw,nosuid,nodev)
  none on /dev/pts type devpts (rw)
  none on /sys type sysfs (rw)
  none on /click type click (rw)

i think a little grovelling and it should be 'easy' to flash it to
whatever one wants.

\p
---
Beware of the man who will give his life for his cause, for he will not
hesitate to give *your* life for his cause. - John W. Campbell