[Noisebridge-discuss] Solderless led holder suggestions

[daniela steinsapir]

Thank you!!

D

On Wed, Apr 28, 2010 at 3:55 PM, Jonathan Foote <jtfoote at ieee.org> wrote:

> There are header connectors like this:
> http://www.sparkfun.com/commerce/product_info.php?products_id=8672
> But that may be a little loose for LEDs as they are designed for .025"
> square header pins
>
> A better bet is something like a "JST connector" which is designed for
> 0.5 mm metric pins, about the width of an LED lead (roughly 0.02")
> http://www.sparkfun.com/commerce/product_info.php?products_id=8598
>
>
> HTH!
>
>
> On Wed, Apr 28, 2010 at 12:51 PM, daniela steinsapir
> <danielast at gmail.com> wrote:
> >  Hi there
> >
> >  I am looking to get this
> >
> >
> http://www.sunshineele.com/sdp/510438/4/pd-2718454/2895721-1318634/LED_holder__solderless_Connector.html
> >
> > Solderless holder with a patented clamping device which enables any LED
> with
> > a standard 2.54mm pitch to be plugged in and held securely. To change the
> > LED simply unplug and replace. Saves space and reduces assembly time. The
> > holder is complete with pre-stripped and tinned 195mm leads. Body moulded
> in
> > Toray 94V-0, dimensions 14.0 x 5.1 x 2.6mm.
> >
> >  Does anybody know of a local store that may  sell it?
> >
> >  I already tried Jameco and digikey..
> >
> > or if anybody knows of a good alternative that would be awesome!
> >
> > Thanks,
> >
> > D
> >
> >
> >
> >
> > --
> > www.danielast.com
> >
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> >
> >
>



-- 
www.danielast.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20100428/e759e171/attachment-0003.html>