[Noisebridge-discuss] Donation Q

jim jim at systemateka.com
Fri Dec 3 19:26:33 UTC 2010


   seems to me good to put tools in the electronic 
work area with a note (printout of your email will 
do). looks to me that everything you;'ve listed 
qualifies as a tool. 


On Fri, 2010-12-03 at 11:11 -0800, Tymm Twillman wrote:
> Hey,
> 
> So if I make it by just to drop off a few assorted odds & ends I missed before, any suggestions on how to leave them so they'll be properly adopted?
> 
> what I've got:
> 
> - 1 x (50mhz?) expendable oscilloscope probe (ebay / chinese import)
> - 1 x PSoC MiniProg 1 (for programming Cypress PSOC-1 chips)
> - 1 x AVR Dragon Debugger Board (had the power supply pop issue, but the jumper workaround mod has been done)
> - 1 x Metcal soldering iron tip changing pad (silicone pad used for swapping out hot tips)
> - 1 x metallic soldering iron tip cleaner
> - 1 x SMD vacuum tool (cheap ebay version) (new)
> - 1 x Adafruit USBTinyISP
> 
> (if any of these would become e-waste, also happy not to send them along)
> 
> 
> ALSO if anyone personally wants them, I have a metric butt-ton of Dallas DS5000FP SIMMSticks (8051-compatible microcontrollers on a SIMM board).  They do need new batteries, but are programmable via serial.  Alternatively they'd probably make OK bracelets.  I also have 1 board I put together like 10 years ago for programming them; current status unknown.  The box has been selected for recycling if no home is found.
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss




More information about the Noisebridge-discuss mailing list