[Noisebridge-discuss] Huge roof leak!

[Jeffrey Malone]

Oh, that's a different MakerBot.

A MakerBot was found on the hack shelf with water damage.

The Noisebridge MakerBot was purchased by several members and is in
the electronics lab.  It was unaffected by the roof leak.

Jeffrey

On Tue, Jan 19, 2010 at 8:47 PM, Martin Bogomolni <martinbogo at gmail.com> wrote:
> The makerbot belongs to Noisebridge, and it's there for everyone to
> learn how to do 3D printing.  It was brought to NB courtesy of Mitch,
> and I have repaired it on occasion.   The last repair was to it's
> printing head (rewrap nichrome wire, upgraded the head to mk4, and
> wrapped the head in some expensive shuttle-blanket thermal material).
> It belongs in the machine shop, or near the electronic tables.  The
> last place the makerbot should have been is the hack shelf!  It's $950
> worth of donated equipment, and it's in great working order.    It
> shouldn't have been there.
>
> -Martin
>
> On Tue, Jan 19, 2010 at 10:42 PM, Ian Atha <thatha at thatha.org> wrote:
>> That's yours then! Yes, it did get damp but we rescued it fairly soon and
>> dried it out on some makeshift heatlamps. Most of the electronics was in
>> ziplocs so it should be safe. A couple of motors were exposed
>>
>> On Jan 19, 2010 8:40 PM, "Martin Bogomolni" <martinbogo at gmail.com> wrote:
>>
>> The makerbot wood didn't get damp, did it?  Or the electronics?
>>
>> -M
>>
>> _______________________________________________ Noisebridge-discuss mailing
>> list Noisebridge-discuss...
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>