[Noisebridge-discuss] Drill bits blower for the shop

[jim]

   as to sharpening drills, i'm interested in 
learning and have lots to practice with. when? 



On Fri, 2017-02-17 at 02:09 -0800, John Magolske wrote:
> * Michael Kan Kan <michaelkan_kan at yahoo.com> [090123 20:13]:
> > I see a box with metric hardware in the shop.
> >
> > Does that mean that a metric drill set will be purchased for the shop?
> > Want to purchase a regular English set for the shop if nobody does.
> 
> Much of the stuff people end up working on is put together with metric
> fasteners, hence the box of metric hardware. Also, some are inclined
> to use metric as it's much more of a global standard. There are also
> others who may find it more convenient to use US Customary (aka
> English, Imperial, standard) units.
> 
> I think both a set of metric and inch drills would be useful. Number
> and letter sizes would be handy too... I'm sure any expansion to our
> drill bit collection you're willing to provide would be appreciated.
> 
> Also, if anyone's interested, I can teach how to sharpen drill bits
> using our bench grinder.
> 
> > Will likely work on the exhaust duct for the blower later perhaps
> > on Saturday.
> 
> I'll be in later this afternoon to start securing the shelving units
> to the walls (seismic safety!), can help out with some of the ducting
> work as well.
> 
> John
> 
>