[Noisebridge-discuss] Elevator Call Radios for Noisebridge

[Michael C. Toren]

On Fri, May 28, 2010 at 12:56:34PM -0700, Jonathan Lassoff wrote:
> > Yup, they are FRS radios.  I've set them up for Channel 8, with
> > sub-carrier 1, with noise-reduction enabled.
> 
> For the hams and radio experimenters in the room, you can tune these in
> on 467.5625 MHz with a CTCSS/PL tone of (probably / I'm guesing) 67 Hz.

Annoyingly, my VX-7R allows me to receive on this frequency, but not
transmit.  (It does not allow me to transmit on CB frequencies, either,
which I also find annoying.)

-mct