[Noisebridge-discuss] Midnight Shop Class

[Joel Jaeggli]

On 11/17/10 2:35 PM, L E wrote:
> Shoot, I was going to say that most shop tools aren't loud _enough_.  
> If the Shipyard has taught me anything, it is that the best tools for 
> everyday <s>alienation</s> fabrication are the chop saw and the 
> angle grinder, and the chop saw is redundant. Oh, and a nod, of 
> course, to the vertical belt sander at SRL.

I've napped in the dc while waiting for a whole row of hp bladeservers
to finish instlling. and had the chicago overhead rail run right past my
window on the 5th floor of the palmer house.

I can easily imagine someone sleeping through the angle grinder.

> On Wed, Nov 17, 2010 at 3:59 PM, Shannon Lee <shannon at scatter.com> wrote:
>> In an effort to make as much noise as possible late at night,
> 
> ... seriously?
> 
> Good on you for doing a shop class... but intentionally being loud as
> some sort of passive-aggressive / just-plain-aggressive move to force
> the other debate seems like a dick move to me. :(
> 
> - Sai
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> 
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>