[Noisebridge-discuss] Midnight Shop Class

Shannon Lee shannon at scatter.com
Wed Nov 17 22:56:21 UTC 2010


We've got a chop saw and a radial arm saw, and there *was* an angle grinder
but I am pretty sure it went to Alabama with Scott (it being Scott's).

A sanding table would be another awesome thing to build.

--S

On Wed, Nov 17, 2010 at 2:35 PM, L E <lexein-esc at yahoo.com> wrote:

> Shoot, I was going to say that most shop tools aren't loud _enough_.
> If the Shipyard has taught me anything, it is that the best tools for
> everyday <s>alienation</s> fabrication are the chop saw and the
> angle grinder, and the chop saw is redundant. Oh, and a nod, of
> course, to the vertical belt sander at SRL.
>
> On Wed, Nov 17, 2010 at 3:59 PM, Shannon Lee <shannon at scatter.com> wrote:
> > In an effort to make as much noise as possible late at night,
>
> ... seriously?
>
> Good on you for doing a shop class... but intentionally being loud as
> some sort of passive-aggressive / just-plain-aggressive move to force
> the other debate seems like a dick move to me. :(
>
> - Sai
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>


-- 
Shannon Lee
(503) 539-3700

"Any sufficiently analyzed magic is indistinguishable from science."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20101117/fce63225/attachment-0003.html>


More information about the Noisebridge-discuss mailing list