[Noisebridge-discuss] Thread about classrooms

[Liz Henry]

I liked the idea of moving some of the shelves and things near the west 
wall/windows and make a good 3D printer nook there!


- liz


On 11/30/11 4:19 PM, Elijah Post wrote:
> Also take into consideration that Andrew is going to try to get us a much
> bigger laser cutter. One that I think would go well to be in a new room
> where the oyster mushrooms are now. Both rooms would be
> elevated separated by a bridge, a noise-  oh wait.
>
> Because there is a lot of crossover between 3D printing and laser cutting,
> we were interested in having both in the same place.
>
> Either way, the 3D printers being where they are doesn't work. I work on
> the building of the two Prusas every [other] Sunday and every time I work
> on them I have to re-jig the entire frames, because people
> keep loosening the nuts all over the frames. Quite annoying.
>
> On Wed, Nov 30, 2011 at 3:01 PM, Rubin Abdi<rubin at starset.net>  wrote:
>
>> Danny O'Brien wrote, On 2011-11-30 14:58:
>>> They do tend to blow people's minds. It's a great moment in the tour,
>>> although I tend to end up leaving it to last.
>>> Put me down as liking the 'sacrificial makerbot' idea at the front, if
>>> we have one to spare.
>>
>> I think it would be great if one simply had a cronjob to start up
>> printing a very simple design at intervals starting around noon and
>> ending around 22:00, with a crappy conveyer belt spitting them out into
>> a bucket, a Noisebucket.
>>
>>> I think once tastebridge's mushrooms are done, that might be a good
>>> space to use. It feels a bit like the stuff for the laser-cutter
>>> really needs a place outside of the laser-cutting room, and the 3D
>>> printers need material and parts too.
>>
>> Again I feel like they're a little loud to be there, especially if we
>> just did a bunch of work to make sound not be so much of a problem.
>>
>>> OH MAN I HAVE OPINIONS
>>
>> AND THEY'RE COMING OUT OF YOUR FINGERS FASTER THAN YOUR MOUTH OR ASS!
>>
>> --
>> Rubin
>> rubin at starset.net
>>
>>
>
>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss


-- 

------------------------
Liz Henry
liz at bookmaniac.org
http://bookmaniac.org

"Without models, it's hard to work; without a context, difficult to
evaluate; without peers, nearly impossible to speak." -- Joanna Russ