[Noisebridge-discuss] Cisco 1200 AP help needed for robot

[John Adams]

I installed all of the Cisco AP 1200's at DNA Lounge. I know them by
heart and have plenty of IOS configs. What are you trying to do?

-j


On Sat, Feb 5, 2011 at 1:05 PM, Jonathan Lassoff <jof at thejof.com> wrote:
> This is so pretty good point. The ap1200 is pretty flexible, and a good
> platform for 802.11, but it's relatively power-hungry.
> The other advantage is that it has an all-metal case.
>
> On Feb 5, 2011 12:37 PM, "Joel Jaeggli" <joelja at bogus.com> wrote:
>
> the other thing with cisco 1200 ap is it wants about 12.5 watts (in a
> dual radio configuration) via it's poe injector at between 48v and 56v.
> so it's somewhat thirsty compared to say random other ap's you could
> probably use for bridges. in les the robot in question has a hefty power
> source (like a packbot with a nitromethane burning two-stroke) you might
> want something smaller.
>
> On 2/5/11 11:45 AM, Jared Dunne wrote:
>> jake-
>>
>> I have a netgear AP available if that helps in ...
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>