[Noisebridge-discuss] Cisco 1200 AP help needed for robot
jof at thejof.com
Sat Feb 5 21:05:53 UTC 2011
This is so pretty good point. The ap1200 is pretty flexible, and a good
platform for 802.11, but it's relatively power-hungry.
The other advantage is that it has an all-metal case.
On Feb 5, 2011 12:37 PM, "Joel Jaeggli" <joelja at bogus.com> wrote:
the other thing with cisco 1200 ap is it wants about 12.5 watts (in a
dual radio configuration) via it's poe injector at between 48v and 56v.
so it's somewhat thirsty compared to say random other ap's you could
probably use for bridges. in les the robot in question has a hefty power
source (like a packbot with a nitromethane burning two-stroke) you might
want something smaller.
On 2/5/11 11:45 AM, Jared Dunne wrote:
> I have a netgear AP available if that helps in ...
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Noisebridge-discuss