[Noisebridge-discuss] Noisebridge Laser Laptop doesn't power on

[Ronald Cotoni]

We should put this software somewhere at noisebridge (a 2nd copy that is)
that or make it so it runs in a vm that we can put on peoples puters.

On Mon, Mar 5, 2012 at 4:06 PM, Martin Bogomolni <martinbogo at gmail.com>wrote:

> Rayc : I have a copy of the software needed to run the laser cutter, if
> needed.
>
> -M
>
> On Sun, Mar 4, 2012 at 8:01 AM, Robert Chu <robertayoungchu at gmail.com>
> wrote:
> > Hello Noisebridge Community,
> >
> > about an hour ago I tried to use the laser cutter and came to find out
> that
> > it's laptop does not power on at all. The laptop's ps is good and the
> > problem is entirely with the computer. If anybody has an idea of what
> > happened to this computer please let me know. In the mean time the laser
> is
> > out of service for the time being, and I will troubleshoot and try to
> get it
> > up and running again asap.
> >
> >
> > From what I know this laptop was working two nights ago, as I was able to
> > use it then.
> >
> >
> > Cheers
> > Rayc
> >
> >
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> >
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>



-- 
Ronald Cotoni
Systems Engineer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20120305/0147b7ec/attachment-0003.html>