[Noisebridge-discuss] Noisebridge Laser Laptop doesn't power on

[Martin Bogomolni]

Or alternately...

We have -lots- of computers.  Can someone just dedicate a trashtop or
older desktop machine to being the dedicated laser cutter machine?

-M


On Mon, Mar 5, 2012 at 6:10 PM, Ronald Cotoni <setient at gmail.com> wrote:
> We should put this software somewhere at noisebridge (a 2nd copy that is)
> that or make it so it runs in a vm that we can put on peoples puters.
>
>
> On Mon, Mar 5, 2012 at 4:06 PM, Martin Bogomolni <martinbogo at gmail.com>
> wrote:
>>
>> Rayc : I have a copy of the software needed to run the laser cutter, if
>> needed.
>>
>> -M
>>
>> On Sun, Mar 4, 2012 at 8:01 AM, Robert Chu <robertayoungchu at gmail.com>
>> wrote:
>> > Hello Noisebridge Community,
>> >
>> > about an hour ago I tried to use the laser cutter and came to find out
>> > that
>> > it's laptop does not power on at all. The laptop's ps is good and the
>> > problem is entirely with the computer. If anybody has an idea of what
>> > happened to this computer please let me know. In the mean time the laser
>> > is
>> > out of service for the time being, and I will troubleshoot and try to
>> > get it
>> > up and running again asap.
>> >
>> >
>> > From what I know this laptop was working two nights ago, as I was able
>> > to
>> > use it then.
>> >
>> >
>> > Cheers
>> > Rayc
>> >
>> >
>> > _______________________________________________
>> > Noisebridge-discuss mailing list
>> > Noisebridge-discuss at lists.noisebridge.net
>> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>> >
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
>
>
> --
> Ronald Cotoni
> Systems Engineer
>