[Noisebridge-discuss] earthquake damage, noise bridge, cnc machine computer
jake at spaz.org
Wed Mar 14 21:07:43 UTC 2012
there is no need to bring more monitors to noisebridge! we have tons.
We even have one with the Apple Display Connector (which is DVI plus power
plus USB ports) AND an adaptor to use it on a regular computer (with DVI).
That computer's monitor was indeed VGA, and the power cord was certainly
simply missing, LIKE THE FOURTH AXIS OF THE CNC MACHINE WHICH IS GONE.
It may have been hard to see but there was certainly either an AC power
socket on the monitor, or a small round DC power jack that was supposed to
take 12v from a power supply.
VGA has no power pins and if it did, the delicate pins would fail anyway
because they could never handle any current like that.
As for letting people tailgate in on you, feel free to let NO ONE tailgate
you. Some people hang back to observe who is waiting at the gate before
approaching. If someone is waiting a long time and has a backpack and a
dog and crusty patches and their fork and cup attached to their belt, I
would not buzz them in or let them tailgate me.
theoretically, anyone you let in is someone you should meet and offer a
tour, so you have an idea of where they're at and what they're using the
space for. But please don't let any of this discourage you from coming to
noisebridge as much as possible.
P.S. ALSO THE 1/8" COLLET FOR THE MILL IS MISSING, WE ONLY HAVE THE 1/4"
ONE NOW. WHERE THE FUCK IS IT?
On Wed, 14 Mar 2012, Jonathan Lassoff wrote:
> On Wed, Mar 14, 2012 at 12:41 PM, Scotty Allen <scotty at scottyallen.com> wrote:
>> As a side note, can you really have an lcd screen that runs off only
>> vga with no power?
> For a time, there were monitors produced with this retarded standard:
> Not VGA, but something similar.
> I have a couple old LCDs, and could probably bring one in for that machine.
More information about the Noisebridge-discuss