[Noisebridge-discuss] wood shop

[Mitch Altman]

Thanks, Casey.


----------------------------------------
> Date: Fri, 7 Sep 2012 10:13:40 -0700
> From: c1 at caseyc.net
> To: noisebridge-discuss at lists.noisebridge.net
> Subject: Re: [Noisebridge-discuss] wood shop
>
> The band slips off pretty easily if the tension isn't correct. The 1/8"
> metal band is the worst culprit... There isn't an easy way to tell the
> correct tension; it just takes trial and error. I'll fix it the next
> time I'm in the space.
>
> Phil, poke me if you'd like to see it done.
> --Casey
>
>
> On 9/6/12 10:13 PM, Andy Isaacson wrote:
> > On Thu, Sep 06, 2012 at 07:31:38PM -0700, Phil Spitler wrote:
> >> My wood cutting went well tonight thanks. No lost digits and I made a
> >> donation.
> >>
> >> One issue I had was after I had done my cuts, the band came loose in
> >> the band saw. I tried to refit it but couldn't figure it out. I asked
> >> a few people but nobody could help.
> >>
> >> I would love it if somebody with knowledge would refit the band ready
> >> for the next person to use.
> > Thanks for sending an email about this! Perhaps someone can leave a
> > note on the bandsaw so that potential users know something needs to be
> > done...
> >
> > -andy
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss