[Noisebridge-discuss] Found a small key

[Martin Bogomolni]

This key is the enable/disable key for the lasercutter itself.  It's
usually attached to a square that is used to focus the machine.

Please put it into the keyhole on top of the laser cutter...   If it's not
there, people won't be able to use the machine.

-M




On Wed, Aug 7, 2013 at 10:56 AM, Nicholas LoCicero
<nick.locicero at gmail.com>wrote:

> I found a very small key, looks smaller than little post office keys.  And
> there is 1 keychain thing attached to it.  The key was on the floor next to
> the lasercutter.
>
> Let me know if it's your's?
>
> Thanks,
> Nick
> (415) muly-ups
> [415.685.9877]
>
> --
> nick*locicero*
> *cell: 415.685.9877 |email: nicklocicero at gmail.com*
> *IMDB <http://www.imdb.com/name/nm3002094/> GIThub<https://github.com/nicklocicero>
>  LINKEDin <http://www.linkedin.com/profile/view?id=59049376> TASKrabbit<https://www.taskrabbit.com/profile/nicholas>
>  **Twitter <https://twitter.com/viraldreams> Tumblr<http://javascriptgenius.tumblr.com/>
> *
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20130807/4b00e6c9/attachment-0003.html>