[Noisebridge-discuss] Next meeting: Things to be repaired (LaserCutter and VinylCutter)
Romy Ilano
romy at snowyla.com
Wed Jun 26 13:58:31 UTC 2013
This is highly awesome ! I will update the wiki
---
Romy Ilano
romy at snowyla.com
On Jun 25, 2013, at 20:52, Casey Callendrello <c1 at caseyc.net> wrote:
> Vinyl cutter is up and running.
> -c
>
> On 6/25/13 10:59 AM, Casey Callendrello wrote:
>> We have almost a dozen spare blades. Some are in the envelope taped to the legs of the vinyl cutter.
>>
>> STOP! Read the instructions first! The blades REALLY HATE fingerprint oil, so don't touch the tip directly. You will then have to calibrate the blade height by cutting a bunch of shitty cuts and fixing it.
>>
>>
>> I swear to god if you guys fuck this vinyl cutter up I will fix it, cut a big middle finger, then throw the whole thing out the window.
>>
>> Hugs and kisses,
>> --Casey
>>
>>
>>
>>
>> On 6/24/13 8:37 PM, Romy Ilano wrote:
>>> Hi,
>>>
>>> There are 2 things to be repaired. I have added them to the next meeting wiki. [I cannot go to the next Noisebridge meeting]
>>>
>>> https://noisebridge.net/wiki/Meeting_Notes_2013_06_25#Things_to_be_Repaired
>>>
>>> The LaserCutter is broken.
>>>
>>> It was told to me that we need to replace the USB Microcontroller for the LaserCutter. I don't know much technical stuff but i'm doing what I can to help: I'm looking up what the part is and how much it costs to replace it.
>>> https://noisebridge.net/wiki/Lasercutter#June_2013_-_Fix_the_LaserCutter
>>> Cost: $449 - through Google Wallet, a RetinaEngrave USB Laser Engraving Processor from the manufacturer of the lasercutter.
>>> http://www.fullspectrumengineering.com/RetinaEngrave.html
>>> The Vinyl Cutter is broken
>>> It was reported to me that the blade needs to be replaced for the vinyl cutter
>>>
>>> I can't verify it if it's the blade that's broken but if it is the blade:
>>>
>>> the replacement blades are cheap, only $19.95 and you can buy them here
>>>
>>> http://www.uscutter.com/USCutter-MH-Series-Vinyl-Cutter-w-Sure-Cuts-A-Lot-Pro-Design-Cut-Software
>>>
>>>
>>>
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>>
>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20130626/cf0ff52e/attachment-0003.html>
More information about the Noisebridge-discuss
mailing list