[Noisebridge-discuss] Next meeting: Things to be repaired (LaserCutter and VinylCutter)

[Martin Bogomolni]

The next time I'm in SF ( July 2nd to the 9th ) I'll pass by and look
at the RetinaEngrave board.   If they aren't grounded properly, they
have a tendency to go on the fritz, but I've fixed a few of them so
far.

-Martin B


On Mon, Jun 24, 2013 at 10:37 PM, Romy Ilano <romy at snowyla.com> wrote:
> Hi,
>
> There are 2 things to be repaired. I have added them to the next meeting
> wiki. [I cannot go to the next Noisebridge meeting]
>
> https://noisebridge.net/wiki/Meeting_Notes_2013_06_25#Things_to_be_Repaired
>
> The LaserCutter is broken.
>
> It was told to me that we need to replace the USB Microcontroller for the
> LaserCutter. I don't know much technical stuff but i'm doing what I can to
> help: I'm looking up what the part is and how much it costs to replace it.
>
> https://noisebridge.net/wiki/Lasercutter#June_2013_-_Fix_the_LaserCutter
> Cost: $449 - through Google Wallet, a RetinaEngrave USB Laser Engraving
> Processor from the manufacturer of the lasercutter.
> http://www.fullspectrumengineering.com/RetinaEngrave.html
>
> The Vinyl Cutter is broken
>
> It was reported to me that the blade needs to be replaced for the vinyl
> cutter
>
> I can't verify it if it's the blade that's broken but if it is the blade:
>
> the replacement blades are cheap, only $19.95 and you can buy them here
>
> http://www.uscutter.com/USCutter-MH-Series-Vinyl-Cutter-w-Sure-Cuts-A-Lot-Pro-Design-Cut-Software
>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>