[Noisebridge-discuss] Moar Laser Cutter Infos
Zach
organic_unity at yahoo.com
Tue Nov 24 20:36:05 UTC 2015
I already posted a ton of pictures here:
http://s18.photobucket.com/user/Segasonicfan/library/NB%20Hardware%20Class?sort=3&page=1
as well as an image link to the PCB we need twice. If someone wants to resize them, that's all you need for the manufacturer. The model is MLE-40.
Personally I think if they want 400 for it that we should just get the used MLE-40 I posted for sale here (its 1500 OBO). Too much is wrong with this unit still to justify dropping that kind of money.
-Zach
--------------------------------------------
On Tue, 11/24/15, Mitch Altman <maltman23 at hotmail.com> wrote:
Subject: Re: [Noisebridge-discuss] Moar Laser Cutter Infos
To: "Zach R" <organicunity at hotmail.com>, "Adam Munich" <adam at aperture.systems>, "NoiseBridge Discuss" <noisebridge-discuss at lists.noisebridge.net>
Date: Tuesday, November 24, 2015, 6:15 AM
If someone can send me
(small-file-size) photos to identify our laser cutter to the
Chinese manufacturer, then we may be able to get the boards
for less, shipped direct from China.
Best,
Mitch.
----------------------------------------
> From: organicunity at hotmail.com
> To: adam at aperture.systems;
noisebridge-discuss at lists.noisebridge.net
> Date: Mon, 23 Nov 2015 09:03:16 +0000
> Subject: Re: [Noisebridge-discuss] Moar
Laser Cutter Infos
>
>
Hey Adam,
> Thanks so much for the reply.
Goddamn that board is expensive - I'm not surprised it
does more given all the ICs on it. Nuts, looks like we need
to cough up $400 for that board then or get a new laser
cutter :/ What a scam, I doubt that PCB costs>$25 to
produce.
> I second your thoughts on
education. I've looked at your site as well as the
manual and have been trying to learn more about the beast so
that it gets taken care of properly.
>
> -Zach
>
>
________________________________________
> From: noisebridge-discuss-bounces at lists.noisebridge.net
<noisebridge-discuss-bounces at lists.noisebridge.net>
on behalf of Adam <adam at aperture.systems>
> Sent: Monday, November 23, 2015 12:16
AM
> To: Noisebridge
>
Subject: Re: [Noisebridge-discuss] Moar Laser Cutter
Infos
>
> I have this
model laser. It's on loan at sudo right now.
>
> The board isn't
just a USB-Parallel converter. On my laser (R.3) the
> board was a mixture of motor drivers, a
few buffers and a CPLD doing
> something
somewhat intelligent. When it failed, I was able to have
> full spectrum replace it with r.4 of their
board for $400, which is
> pretty
identical, though they've done away with the DB25 port
in favor
> of direct to CPLD - USB.
>
> I have a guide on the
use of these lasers here. http://hack.rit.edu/tools/fsl/
>
> I would not recommend
hacked solutions over the FSL board, unless the
> solution is well documented, on a
dedicated computer, backed up, and
>
taught to a few NB chiefs. My time running RIT's
hackerspace has
> taught that lack of
education is the #1 reason people don't use tools
> like these, and when there's no one to
teach, nothing will get done,
> and that
sometimes it really is better to just pay extra for
> something that just works.
>
> -A
> -^-^-^-^-^-
> Adam
Munich - Builder of wild things (and organizations)
> Tel: +1-650-452-0554
>
> The key to mastering
any skill is nothing more than passion and persistence.
>
>
>
On Sun, Nov 22, 2015 at 2:30 AM, Mitch Altman <maltman23 at hotmail.com>
wrote:
>> FYI: My friend Aqua
(who's Chinese) called the company who actually makes
the laser cutter (jnmydy.com is only a distributor), and
they told her that they cannot sell us just the power
Parallel to USB controller and main power motherboard PCBs
separately, but they sell the "whole set" and some
raw components. She will call be on Monday and find out how
much the "whole set" costs.
>>
>>
>> And, yeah, I'd still really like
to get reimbursed for the laser tube I bought for
Noisebridge for $237.37 last year.
>>
>>
>> Best,
>>
>> Mitch.
>>
>>
>>
>>
>>
________________________________
>>> From: organicunity at hotmail.com
>>> To: noisebridge-discuss at lists.noisebridge.net
>>> Date: Sun, 22 Nov 2015 02:29:14
+0000
>>> Subject: Re:
[Noisebridge-discuss] Moar Laser Cutter Infos
>>>
>>>
>>> So looking through the NB discuss
list history (and talking to myself
>>> more here) there are actually a
few more things the Laser Cutter
>>> needs. From what I understand
there is:
>>>
>>>
>>> 1)
Parallel> USB controller board needed (waiting for word
from the
>>> people at Full
Spectrum Laser and the shop in China for a price quote -
>>> anyone received a reply?) Also,
Henner says he might be able to hack
>>> this with Arduino
>>>
>>> 2)
Water pump and one hose missing (according to Adam's
email from the
>>> Hackathon in
July)
>>>
>>> 3) Air Pump maybe (haven't
checked to see if we have this)
>>>
>>> 4)
Calibration of mirrors and stuff (can someone volunteer to
do this?
>>> we have manuals for
it, it's just tedious)
>>>
>>> 5) Minor wiring and screws install
work (I volunteer to do this)
>>>
>>> 6) a
Windows machine to run the software (I can donate one if
needed)
>>>
>>> 7) Install software and key (I
guess Jerrod has this info?)
>>>
>>>
>>> Just
trying to document the steps needed in one place here for
>>> everyone. Finally, we need to pay
Mitch back for the $237 he spent on
>>> the new tube. Below is an old
email with details from the thread here
>>> "Laser cutter repair
bounty"
>>>
>>>
>>> Adam:
"I tried fixing it at the stupid shit hackathon but I
could not
>>> find the water pump
and the other rubber hose. There is otherwise
>>> everything you need to get the
laser cutter running."
>>>
>>>
>>>
Mitch: "Zach -- please see the email from Henner,
copied below, for a
>>> list of
things that needs to be done. And please see the Doodle sent
by
>>> Rubin, copied below, to pick
a time to meet to fix the lasercutter.
>>> Everyone -- I paid for the laser
tube when I was in China. I would very
>>> much love to be paid back for it.
It cost me: Laser tube: $120.37
>>>
shipping from Shenzhen to SF: $117.00 Total: $237.37 Would
people be
>>> kind enough to pitch
in, and help collect for this? Thanks, Mitch."
>>>
>>>
-------------------------------------- From: organicunity at hotmail.com
>>> To: noisebridge-discuss at lists.noisebridge.net
Date: Sun, 12 Jul 2015
>>> 08:39:50
+0000 Subject: Re: [Noisebridge-discuss] Laser cutter
repair
>>> bounty .ExternalClass P
{ } I already offered to help with this....I
>>> thought Adam (and someone else)
got it fixed recently. If someone will
>>> give me the low down on what needs
to be done I'm happy to work on it.
>>> and hey, throwing money (and
burritos) at poor techs like me definitely
>>> can get shit done! -Zach From:
>>> noisebridge-discuss-bounces at lists.noisebridge.net
on behalf of Rubin
>>> Abdi Sent:
Saturday, July 11, 2015 3:54 PM To: Henner Zeller Cc:
James
>>> Sundquist; NB Discuss
Subject: Re: [Noisebridge-discuss] Laser cutter
>>> repair bounty Do you want to make
the laser go? Fill out the fucking
>>> Doodle... https://doodle.com/3rnzd5fy74kfwd9b On
11 July 2015 at 14:41,
>>> Henner
Zeller wrote: I'd rather you guys organize some time
where
>>> everyone who wants to
help has time (get creative, there are some
>>> online
find-free-time-slots-for-a-couple of people online. @rubin
was
>>> using one of these
recently). Money won't get things done, chip in an
>>> hour of your work. _That_ would
help more getting this done. I am happy
>>> to help, but being alone working
on that will take weeks of time here
>>> and there. What needs to be done,
and with a few people, that would be
>>> doable in an afternoon. - check if
we have the water pump and air pump
>>> in working condition. If not, get
new ones. - Get a bucket of 5 Gallons
>>> of distilled water. - Connect the
laser tube to the high voltage power
>>> supply (as far as I know, the new
tube is already in the cutter)000 -
>>> calibrate things, mirrors and
stuff. - make a free space in the corner
>>> of Noisebridge next to the
windows, now full of DJ gear. - Find a table
>>> to put it on permanently. -
Prepare an outlet in the window where we
>>> can connect the blower pipe. - Get
the software installed somewhere (I
>>> think Jarrod has a license key
somewhere and we need a windows
>>>
machine). -h On 11 July 2015 at 14:31, jarrod hicks wrote: I
too will
>>> match that. On Jul 11,
2015 12:32 PM, "James Sundquist" wrote: I will
>>> give $20 to anyone who has the
laser cutter restored and calibrated at
>>> nb. --- Sent from Boxer | http://getboxer.com
>>>
>>>
>>>
>>>
>>>
>>>
________________________________
>>> From: noisebridge-discuss-bounces at lists.noisebridge.net
>>> <noisebridge-discuss-bounces at lists.noisebridge.net>
on behalf of Zach R
>>> <organicunity at hotmail.com>
>>> Sent: Friday, November 20, 2015
5:54 PM
>>> To: NB Discuss; Eric
Michaud
>>> Subject: Re:
[Noisebridge-discuss] Moar Laser Cutter Infos
>>>
>>>
>>> OK so I took the laser cutter Main
PCB home last night and did some
>>> work on it. I believe I got it all
fixed up now, with the proper +5v
>>> and +24v LEDs lighting up now - it
should be working 100% ! :D
>>>
>>> proof:
>>>
>>> http://i18.photobucket.com/albums/b134/Segasonicfan/NB%20Hardware%20Class/20151120_172957_zpskt9g4iww.jpg
>>>
>>> http://i18.photobucket.com/albums/b134/Segasonicfan/NB%20Hardware%20Class/20151120_172935_zpstz0a2oaj.jpg
>>> <http://i18.photobucket.com/albums/b134/Segasonicfan/NB%20Hardware%20Class/20151120_172957_zpskt9g4iww.jpg>
>>>
>>>
>>> Now the only thing left (aside
from me fixing some crappy wiring jobs,
>>> installing the tube, and replacing
screws and fuses) is the CONTROLLER
>>> BOARD that handles Parallel>
USB. Here is a link to it again:
>>>
>>> https://moderndevice.com/wp-content/uploads/2012/06/fse-controller-768x1024.jpg
>>>
>>>
>>> Has anyone received a response
from the manufacturer about this? Eric,
>>> could you ask Full Spectrum Laser
for the price cost for just this
>>> board (I know they quoted $700 for
both, but I have the larger one
>>>
working now). LMK.
>>>
>>>
________________________________
>>> From: noisebridge-discuss-bounces at lists.noisebridge.net
>>> <noisebridge-discuss-bounces at lists.noisebridge.net>
on behalf of Zach R
>>> <organicunity at hotmail.com>
>>> Sent: Tuesday, November 3, 2015
11:39 PM
>>> To: NB Discuss
>>> Subject: [Noisebridge-discuss]
Moar Laser Cutter Infos
>>>
>>>
>>> So I
brought this up at the meeting tonight and then I did
more
>>> research. Found some more
useful info.
>>>
>>>
>>> model
#: MLR-40
>>>
>>> 40w Full Spectrum Laser
>>>
>>>
Manufacturer website: http://en.jnmydy.com/
>>>
>>>
>>> And here are the pictures I
took:
>>>
>>> http://s18.photobucket.com/user/Segasonicfan/library/NB%20Hardware%20Class?sort=3&page=1
>>>
>>> Here
is the controller board we are missing:
>>>
>>> https://moderndevice.com/wp-content/uploads/2012/06/fse-controller-768x1024.jpg
>>>
>>> http://www.laserresale.com/?fa=app.view=5966<https://us-mg4.mail.yahoo.com/compose?to=gwen246%40gmail.com>
>>> https://moderndevice.com/news/full-spectrum-engineering-40w-hobby-laser/
>>> http://wiki.lvl1.org/Full_Spectrum_Laser
>>> http://www.therpf.com/showthread.php?t=140518
>>>
>>> https://fslaser.com/Manuals/FSL_40w_Hobby_Laser_Manual.pdf
(manual)
>>>
>>>
>>> There
is a second hand one for $1500 we could raise money for.
That
>>> way we have this one for
parts. That's one option.
>>>
>>> Im
going to try emailing the manufacture to see what
replacement costs
>>> would be.
>>>
>>>
>>> -Zach
>>>
>>>
_______________________________________________
Noisebridge-discuss
>>> mailing
list Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
_______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
_______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
_______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
_______________________________________________
Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
More information about the Noisebridge-discuss
mailing list