[Noisebridge-discuss] NB LED table repaired

jarrod hicks hicksu at gmail.com
Fri Jan 15 19:12:21 UTC 2016


Thank you very much for getting the table up an running.

On Fri, Jan 15, 2016 at 11:09 AM, Zach R <organicunity at hotmail.com> wrote:
>
> oh I forgot to add:  DON'T plug any Heaters or Hot Air guns into this table!
> I am pretty certain one of these is what led to the fuse melting.
>
> The table has a Max Wattage of ~1000 Watts.  The things mentioned above are
> usually rated at 1,500 Watts.
>
> Things that you can plug into the table without any issue are:
>
>
> Laptops
>
> Soldering Irons
>
> Lights
>
> LCD TVs
>
> etc
>
>
> Really almost anything else at the space.  If someone could post a note on
> the table warning about this it would be most excellent.  or I can do it
> next time I'm in the space in a few days.
>
>
> -Zach
>
> ________________________________
> From: noisebridge-discuss-bounces at lists.noisebridge.net
> <noisebridge-discuss-bounces at lists.noisebridge.net> on behalf of Zach R
> <organicunity at hotmail.com>
> Sent: Friday, January 15, 2016 12:16 AM
> To: NB Discuss
> Subject: [Noisebridge-discuss] NB LED table repaired
>
>
> The black power cable that plugs into the wall socket of the nice NB logo
> LED table melted.  It in turn melted the fuse (yes, melted) which finally
> made this non-working.  Fuses of the size it takes are notoriously hard to
> find (at NB anyway) but I did find a micro 15A fuse that I soldered on the
> inside, behind the power plug.  It covered in electrical tape for extra
> safety (and style).  I also wired the light on the switch to AC mains, so
> you can now tell if it is working or dead.
>
> That table is one of the best things in the space, thanks Jarrod!
>
>
> -Zach
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>



More information about the Noisebridge-discuss mailing list