[Noisebridge-discuss] arduino dmx receiver

[Robert "Finny" Merrill]

If you want one written in raw C (not arduino) I rolled my own a while
ago: https://github.com/rfmerrill/venusdmx/blob/master/venusdmx.c

It requires you to wire the DMX to the hardware UART (which on an
arduino is usually not exposed and is dedicated to the USB-serial
interface)

On Thu, Apr 7, 2016 at 2:07 AM, robb <sf99er at gmail.com> wrote:
> as it turns out, mathertels DmxSerialRecv example works out of the box
> w/Arduino 1.6.8 but my connection from DE to RE was loose. jerkey looked at
> it and squeezed it and it started working!
> w/DMXSerialRecv:
> DE & RE are connected together & to pin 2.
> RO is connected to Rx.
>
> cheers
>
>
>
> On Fri, Apr 1, 2016 at 5:19 PM, robb <sf99er at gmail.com> wrote:
>>
>>
>> //       Turns out that as I'm using an ungrounded power brick, I probably
>> don't need all of this, but I had all the parts so I made them anyway :)
>>
>> easier to switch power supply, than to add isolation
>>
>> //       Take a look in HardwareSerial0.cpp; it looks like you'll want to
>> search for USART_RX_vect and USART0_RX_vect.
>>
>> thx, found it. after editing file, still couldn't receive tho.
>>
>> //        This probably changed when the Arduino folks started making
>> boards with more than one serial port.
>>
>> i think your right
>>
>> //        Nothing so far -- I'm making lighting stuff for my wedding in a
>> couple of months, and I want a friend who does a lot of DMX lighting to be
>> able to control my hardware with his controllers!
>>
>> congrats & i look forward to seeing your implementations!
>> i'm hoping to eventually add 7segment leds displays for setting the dmx
>> channel w/up & down buttons, if i get it working.
>> different modes would be nice, too
>>
>> cheers,
>> ~r
>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>