[Fab] Dustpocalypse

[Rubin Abdi]

Hi Jacob, thanks for your input and help. However I think you've gotten the
lists mixed up a bit. Fab@ has mostly been used for 3d printing stuff. You
might want to forward your email to the build@ list, I think there are more
people there invested in the shop than here...

https://www.noisebridge.net/mailman/listinfo/build

Thanks.

--
Rubin
rubin at starset.net
On Dec 9, 2014 11:11 AM, "Jacob Fenwick" <jacob.fenwick at gmail.com> wrote:

> Oops... sent a little too soon.
> I walked into the shop, and there was so much dust that there were clouds
> thick in the air and I started coughing.
> In general people should clean up after themselves.
> I vacuumed up a bit and tried some of the machines.
> One of the lathes seems to be broken, but one is functional.
> I took some plastic and covered up the lathes and the milling machine
> since sawdust + hot metal chips could = fire.
> I also noticed the grinder doesn't have rests, which is a bit dangerous,
> so if I can find some angle and a bandsaw I might try to fix it.
> I'll be around for the rest of the month, so I may stop in a bit more and
> see what I can do to improve things.
> Could really use a new vacuum in there... it sucks, in the wrong way.
>
> On Tue, Dec 9, 2014 at 11:08 AM, Jacob Fenwick <jacob.fenwick at gmail.com>
> wrote:
>
>> hi I'm Jacob,
>>
>> I've spent the last couple years hanging out at Artisan's Asylum learning
>> to use tools.
>>
>> I came by to check out noisebridge last night.
>>
>
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/fab/attachments/20141209/f7fb87c9/attachment-0003.html>