[Fab] Dustpocalypse

[miloh]

either way, it doesn't matter.  you could even cross post if you dare.

On Tue, Dec 9, 2014 at 11:23 AM, Rubin Abdi <rubin at starset.net> wrote:
> Hi Jacob, thanks for your input and help. However I think you've gotten the
> lists mixed up a bit. Fab@ has mostly been used for 3d printing stuff. You
> might want to forward your email to the build@ list, I think there are more
> people there invested in the shop than here...
>
> https://www.noisebridge.net/mailman/listinfo/build
>
> Thanks.
>
> --
> Rubin
> rubin at starset.net
>
> On Dec 9, 2014 11:11 AM, "Jacob Fenwick" <jacob.fenwick at gmail.com> wrote:
>>
>> Oops... sent a little too soon.
>> I walked into the shop, and there was so much dust that there were clouds
>> thick in the air and I started coughing.
>> In general people should clean up after themselves.
>> I vacuumed up a bit and tried some of the machines.
>> One of the lathes seems to be broken, but one is functional.
>> I took some plastic and covered up the lathes and the milling machine
>> since sawdust + hot metal chips could = fire.
>> I also noticed the grinder doesn't have rests, which is a bit dangerous,
>> so if I can find some angle and a bandsaw I might try to fix it.
>> I'll be around for the rest of the month, so I may stop in a bit more and
>> see what I can do to improve things.
>> Could really use a new vacuum in there... it sucks, in the wrong way.
>>
>> On Tue, Dec 9, 2014 at 11:08 AM, Jacob Fenwick <jacob.fenwick at gmail.com>
>> wrote:
>>>
>>> hi I'm Jacob,
>>>
>>> I've spent the last couple years hanging out at Artisan's Asylum learning
>>> to use tools.
>>>
>>> I came by to check out noisebridge last night.
>>
>>
>>
>> _______________________________________________
>> Fab mailing list
>> Fab at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/fab
>>
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>