[Fab] Dustpocalypse
Mitch Altman
maltman23 at hotmail.com
Wed Dec 10 00:23:14 UTC 2014
Bummer about the shop vac disappearing. We really should get another if we don't have one.
Thanks for your help, Jacob! I look forward to seeing you when I get back home to SF in a couple days.
(I've cc-ed the Build list here.)
Best,
Mitch.
> Date: Tue, 9 Dec 2014 11:40:15 -0800
> From: froggytoad at gmail.com
> To: rubin at starset.net
> CC: fab at lists.noisebridge.net
> Subject: Re: [Fab] Dustpocalypse
>
> either way, it doesn't matter. you could even cross post if you dare.
>
> On Tue, Dec 9, 2014 at 11:23 AM, Rubin Abdi <rubin at starset.net> wrote:
> > Hi Jacob, thanks for your input and help. However I think you've gotten the
> > lists mixed up a bit. Fab@ has mostly been used for 3d printing stuff. You
> > might want to forward your email to the build@ list, I think there are more
> > people there invested in the shop than here...
> >
> > https://www.noisebridge.net/mailman/listinfo/build
> >
> > Thanks.
> >
> > --
> > Rubin
> > rubin at starset.net
> >
> > On Dec 9, 2014 11:11 AM, "Jacob Fenwick" <jacob.fenwick at gmail.com> wrote:
> >>
> >> Oops... sent a little too soon.
> >> I walked into the shop, and there was so much dust that there were clouds
> >> thick in the air and I started coughing.
> >> In general people should clean up after themselves.
> >> I vacuumed up a bit and tried some of the machines.
> >> One of the lathes seems to be broken, but one is functional.
> >> I took some plastic and covered up the lathes and the milling machine
> >> since sawdust + hot metal chips could = fire.
> >> I also noticed the grinder doesn't have rests, which is a bit dangerous,
> >> so if I can find some angle and a bandsaw I might try to fix it.
> >> I'll be around for the rest of the month, so I may stop in a bit more and
> >> see what I can do to improve things.
> >> Could really use a new vacuum in there... it sucks, in the wrong way.
> >>
> >> On Tue, Dec 9, 2014 at 11:08 AM, Jacob Fenwick <jacob.fenwick at gmail.com>
> >> wrote:
> >>>
> >>> hi I'm Jacob,
> >>>
> >>> I've spent the last couple years hanging out at Artisan's Asylum learning
> >>> to use tools.
> >>>
> >>> I came by to check out noisebridge last night.
> >>
> >>
> >>
> >> _______________________________________________
> >> Fab mailing list
> >> Fab at lists.noisebridge.net
> >> https://www.noisebridge.net/mailman/listinfo/fab
> >>
> >
> > _______________________________________________
> > Fab mailing list
> > Fab at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/fab
> >
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/fab/attachments/20141209/1c80f6be/attachment-0003.html>
More information about the Fab
mailing list